XD Kicker Assembly

XD Kicker Assembly
XD Kicker Assembly
Complete ready rigged XD kicker assembly - all Harken - using the Harken 2158 18mm double Carbo Block as the middle block, and a Harken 466 top block with the new stronger design kicker key. The primary line is 3mm SK78 Dyneema. The 4mm secondary control line rope is SK78 Dyneema cored/Polyester covered - choose from FSE Robline Dinghy Control (available in Red/White, Yellow/White, Navy Blue/White and Purple/White) and Gottifredi Maffioli Evolution Race 78 (available in Orange/Black, Lime Yellow/Black, Black/Silver, Blue/Black and Red/Black melange style colours). Includes plastic handle or extra length line secondary line for a braided chain type handle. System options below allow you to neatly take one purchase taken out of your kicker assembly, change the middle block type and upgrade to SK99 primary
£235.00
Primary Line Colour :
Secondary Line Type/Colour :
Secondary line length :
System Options

Add any of the following system options when you order the XD Kicker Assembly above.

Remove One Purchase
Remove One Purchase
As an option we can take one purchase out of your kicker system. The secondary control line has a spliced loop at one end which is neatly attached to the top block on the kicker assembly.
£0.00

SK99 Primary Line Upgrade
SK99 Primary Line Upgrade
As an option we can fit an SK99 Dyneema primary line to the kicker assembly instead of the SK78 Dyneema primary. The SK99 Dyneema primary (grey only) is also slightly thicker than the standard SK78 primary.
£3.00
Use Harken 407 Double 16mm Block with Becket for Centre Block
Use Harken 407 Double 16mm Block with Becket for Centre Block
Use the Harken 407 traditional metal kicker middle block instead of the Harken T2 Carbo Block for a 15:1 kicker setup
£0.00
Use Harken 406 Double 16mm Block for Centre Block
Use Harken 406 Double 16mm Block for Centre Block
Use the Harken 406 traditional metal kicker middle block instead of the Harken T2 Carbo Block for a 12:1 kicker setup. If you add this system option it will be assumed that you want a 12:1 setup
£0.00

Share page